Origins of Boosted Charge Storage on Heteroatom-Doped Carbons

Although tremendous efforts have been devoted to understanding the origin of boosted charge storage on heteroatom-doped carbons, none of the present studies has shown a whole landscape. Herein, by both experimental evidence and theoretical simulation, it is demonstrated that heteroatom doping not only results in a broadened operating voltage, but also successfully promotes the specific capacitance in aqueous supercapacitors. In particular, the electrolyte cations adsorbed on heteroatom-doped carbon can effectively inhibit hydrogen evolution reaction, a key step of water decomposition during the charging process, which broadens the voltage window of aqueous electrolytes even beyond the thermodynamic limit of water (1.23 V). Furthermore, the reduced adsorption energy of heteroatom-doped carbon consequently leads to more stored cations on the heteroatom-doped carbon surface, thus yielding a boosted charge storage performance.     

Proton conductivity study on three CS/IL@fle-MOF membranes

The low-cost, high specific surface area and porosity, controlled pore size, and chemical properties of metal–organic framework (MOF) materials have attracted much attention in the exploration of proton conduction. The method of chemically modifying MOF structures or introducing conductive medium into the holes can effectively improve the proton conductivities of the materials. Here, the structural tunability of ionic liquid (IL) and flexible MOF (fle-MOF) materials are matched to give full play to the conductivity of IL, the framework support, and the microporous effect of MOFs, which achieves the synergistic effect of performance and expands the temperature range of proton transfer. Three kinds of CS/IL@fle-MOF membranes were prepared by combining three fle-MOFs with 1-carboxymethyl-3-methylimidazole (CMMIM) in different proportions to obtain 15 pieces of membranes. The comparative analyses show that CS/IL@fle-MOF membranes have excellent proton conduction performance at a wider temperature range (263–353 K) and lower relative humidity (75% RH). Among them, the proton conductivities of CS/CMMIM@MIL-88A-25% and CS/CMMIM@MIL-88B-125% are up to 1.33 and 1.42 S cm⁻¹ at 75% RH and 353 K, respectively; whereas those of CS/CMMIM@MIL-53(Fe)-75% and CS/CMMIM@MIL-88B-125% reach up to 2.1 × 10⁻³ and 1.28 × 10⁻³ S cm⁻¹ at 75% RH and 263 K, respectively. The E_a of CS/CMMIM@fle-MOFs is in the range of 0.1–0.5 eV, suggesting that the proton transport follows predominantly the typical Grotthuss transfer mechanism. The results of this study indicate that the CS/CMMIM@fle-MOF membranes combinations offer great potential for the design of composite porous proton-conducting materials.     

Stochastic chemo-physical-mechanical degradation analysis on hydrated cement under acidic environments

The accumulation of material degradation under contact with aggressive aqueous environments could lead to reduced structural reliability. In terms of hydrated cementitious materials, such interactions often result in the chemo-physical-mechanical (CPM) degradation, which represents a multiphysics process of high non-linearity and complexity. By further considering the inevitable uncertainties associated with both the materials and the serving conditions, solving such a process requires novel probabilistic approaches. This paper presents a stochastic chemo-physical-mechanical (SCPM) degradation analysis on the hydrated cement under acidic environment. The SCPM analysis consists of modelling the stochastic chemophysical degradation by finite element method, and assessing the mechanical deterioration through analytical micromechanics. The proposed modelling framework couples the conventional Monte Carlo Simulation with a novel support vector regression algorithm. The present method is able to not only address the detailed degradation mechanisms, but also ensure low computational costs for an accurate SCPM degradation assessment.     

Comparative Study of the Supercapacitive Performance of Three Ferrocene-Based Structures: Targeted Design of a Conductive Ferrocene-Functionalized Coordination Polymer as a Supercapacitor Electrode

As redox-active based supercapacitors are known as highly desirable next-generation supercapacitor electrodes, the targeted design of two ferrocene-functionalized (Fc(COOH)₂) clusters based on coinage metals, [(PPh₃)₂AgO₂CFcCO₂Ag(PPh₃)₂]₂ ⋅ 7 CH₃OH (SC₁: super capacitor) and [(PPh₃)₃CuO₂CFcCO₂Cu(PPh₃)₃] ⋅ 3 CH₃OH (SC₂), is reported. Both structures are fully characterized by various techniques. The structures are utilized as energy storage electrode materials, giving 130 F g⁻¹ and 210 F g⁻¹ specific capacitance at 1.5 A g⁻¹ in Na₂SO₄ electrolyte, respectively. The obtained results show that the presence of Cu^I instead of Ag^I improves the supercapacitive performance of the cluster. Further, to improve the conductivity, the PSC₂ ([(PPh₃)₂CuO₂CFcCO₂]_∞), a polymeric structure of SC₂, was synthesized and used as an energy storage electrode. PSC₂ displays high conductivity and gives 455 F g⁻¹ capacitance at 3 A g⁻¹. The PSC₂ as a supercapacitor electrode presents a high power density (2416 W kg⁻¹), high energy density (161 Wh kg⁻¹), and long cycle life over 4000 cycles (93 %). These results could lead to the amplification of high-performance supercapacitors in new areas to develop real applications and stimulate the use of the targeted design of coordination polymers without hybridization or compositions with additive materials.     

Iodine/persulfate-promoted site-selective direct thiolation of quinolones and uracils

A simple and general method for direct thiolation of 4-quinolones with disulfides or thiols under I₂/K₂S₂O₈ system has been developed. Under the optimal conditions, the C–S bond coupling can take place effectively with good to decent yields and excellent regioselectivity of the S-linked products. The established metal-free site-selective approach was also applicable to transform a range of uracil substrates to the thio-substituted products under mild conditions. Further transformation to the sulfone derivatives can be conveniently performed in one-pot. These easy-to-handle protocols represent a useful and interesting synthetic alternative with good substrate scope and functional group compatibility.     

Biosurfactants: Opportunities for the development of a sustainable future

Changes in the environment in recent years have led to the examination of the role and influence human activities on it. Attempts to quantify the impact of these activities by developing standardized modeling frameworks through life cycle sustainability assessment is one such approach in the context of sustainability seeking to measure the impact of human interventions from a holistic perspective that includes economic, social, and environmental dimensions. Sustainable alternatives to synthetic products are always keenly sought after. Biosurfactants are emerging as suitable alternatives to the predominant less sustainable petroleum-derived counterparts. Several factors surrounding their production, distribution, and end-use, however, still needs to be considered before conclusively confirming their sustainability. Though data are still limited in that subject matter, research showing their impact on some sustainability indicators is highlighted. This review discusses the potential of biosurfactants as sustainable products in the context of social, economic, and environmental aspects.     

Base-promoted N-alkylation using formamides as the N-sources in neat water

An efficient catalyst-free, alternative method for the C–N bond formation reaction of alkyl electrophiles using formamides as the N-sources was achieved under mild conditions. The reaction possesses the advantages of a broad range of substrates scope and wide functional group tolerance. It should also be noted that this process was performed using the environmentally benign water as the sole solvent, and high yield can also be achieved in ten-gram scale.     

Self‐assembly of nanorod/nanoparticle mixtures in polymer brushes

The aggregation behavior and phase separation of nanorod (NR)/nanoparticle (NP) nanoinclusions immersed in semiflexible polymer brushes (PBs) are investigated by using molecular dynamics simulations. A variety of phases are formed by varying the size ratio q = σ_r/σ_p, where σ_r and σ_p are the diameters of NR and NPs, respectively, and the attractive interactions ε_M between NR/NP nanoinclusions and PBs. Ordered structures of NRs surrounded by large NPs are observed for the small size ratio q, and a dispersed mixture phase appears for the moderate size ratio q at weak attractive interaction. Meanwhile, the crystallization of NRs occurs at strong attractive interaction for the large size ratio q and a main face‐centered cubic (fcc) structure combined with a small amount of hexagonal‐closed packed (hcp) structure is observed. This investigation can provide some insights into the self‐assembly of complex nanoinclusions and promise a new approach for controlling the self‐assemble behavior of NPs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 299–309     

Bioremediation strategies of palm oil mill effluent and landfill leachate using microalgae cultivation: An approach contributing towards environmental sustainability

Palm oil mill effluent (POME) is defined as the wastewater that contains high concentrations of organics, nutrients and oil and grease generated from the production process of palm oil. Therefore, proper discharge and management of POME is important to avoid deleterious impact on the environment. In fact, solid waste generation is a precursor for its disposal issues as most of the solid waste generated in developing nations is dumped into landfills. This has led to the threat posed by the generation of landfill leachate (LL). LL is a complex dark coloured liquid consisting of organic matter, inorganic substances, trace elements and xenobiotics. Hence, it is essential to effectively treat the landfill leachate before discharging it to avoid contamination of soil, surface & groundwater bodies. Conventional treatment methods comprises of physical, biological and chemical treatment, however, microalgal-based treatment could also be incorporated. Furthermore, with the benefits offered by microalgae in valorisation, the application of microalgae in POME and leachate treatment as well as biofuel production, is considerably viable. This paper provides an acumen of the microalgae-based treatment of POME and LL, integrated with biofuel production in a systematic and critical manner. The pollutants assimilation from wastewater and CO₂ biosequestration are discussed for environmental protection. Cultivation systems for wastewater treatment with simultaneous biomass production and its valorisation, are summarised. The study aims to provide insight to industrial stakeholders on economically viable and environmentally sustainable treatment of wastewaters using microalgae, and eventually contributing to the circular bioeconomy and environmental sustainability.